ACA232B | Hager Australia (2024)

Architecture

• Neutral position

  right

• Number of protected poles

  1

• Number of poles

  1 P

• Type of pole

  1 P

• Curve

  C

Configuration

• Number of modules

  1

Connectivity

• Top connection alignement for modular devices

  Shifted terminal

• Bottom connection alignement for modular devices

  Aligned terminal

Main electrical features

• Rated short circuit breaking capacity Icn AC according IEC60898-1

  10 kA

• Rated operational voltage Ue

  230 / 240 V

• Type of supply voltage

  AC

• Frequency

  50/60 Hz

Voltage

• Rated insulation voltage

  250 V

• Rated impulse withstand voltage

  4000 V

Electric current

• Rated residual operating current

  10 mA

• Rated current

  32 A

• Withstand not tripping on 8-20 μs wave

  0.2 kA

• Breaking and opening capacity

  6000 A

• min/maxi threshold value of the AC thermal operation

  1.13 / 1.45 In

• Magnetic regulating currrent

  5 / 10 In

Electric current / temperature

• Rating current -25°C

  42.45 A

• Rating current -20°C

  41.5 A

• Rating current -15°C

  40.55 A

• Rating current -10°C

  39.6 A

• Rating current -5°C

  38.65 A

• Rating current 0°C

  37.7 A

• Rating current 5°C

  36.75 A

• Rating current 10°C

  35.8 A

• Rating current 15°C

  34.85 A

• Rating current 20°C

  33.9 A

• Rating current 25°C

  32.95 A

• Rating current 30°C

  32 A

• Rating current 35°C

  31.15 A

• Rating current 40°C

  30.3 A

• Rating current 45°C

  29.45 A

• Rating current 50°C

  28.6 A

• Rating current 55°C

  27.75 A

• Rating current 60°C

  26.9 A

• Rating current 65°C

  26.05 A

• Rating current 70°C

  25.2 A

Dimensions

• Depth of installed product

  70 mm

• Height of installed product

  115 mm

• Width of installed product

  17.8 mm

Frequency

• Frequency

  50 to 60 Hz

Power

• Total power loss under IN

  9.9 W

• Power loss per pole at In

  5.8 W

Endurance

• Electric endurance in number of cycles

  2000

• Number of mechanical operations

  10000

Installation, mounting

• Type of top connection for modular devices

  with screw

• Type of bottom rail clip for modular devices

  metallic isolated

• Type of Bottom Connection for modular devices

  BIconnect

• Top removability for modular devices

  No

• Bottom removability for modular devices

  No

• Suitable for flush-mounting

  Yes

Connection

• Connection cross-section at output with screw, for flexible conductor

  1 / 16 mm²

• Connection cross-section at output with screw, for massive conductor

  1 / 25 mm²

• Connection cross-section for rigid conductor, upstream terminals with screws

  1 / 16 mm²

• Connection cross-section of the access with screws, with flexible conductor

  1 / 10 mm²

• Downstream cage clamp delivery status

  opened

• Upstream cage clamp delivery status

  opened

• Connection cross-section of input and output with screws, for massive conductors

  1 / 25 mm²

• Connection cross section of access and exit with screws, for flexible conductor

  1 / 16 mm²

Cable

• Length of conductors used for the heating test (m) according to product standard

  1 m

• Conductor cross-section used for heating test(mm²) according to product standard

  6 mm²

Equipment

• Quick connect

  no

• Type selective

  No

• Can be accessorized

  No

• With transparent product label holder

  Yes

Standards

• Standard text

  IEC 61009-1

• European directive WEEE

  concerned

Safety

• Protection index IP

  IP20

• Residual current type

  A

• REACH conform

  No

• RoHS conform

  Yes

• Halogen free

  No

Use conditions

• Operating temperature

  -5…40 °C

• Degree of pollution according to IEC 60664 / IEC 60947-2

  2

• Class of energy limitation I²t

  3

• Altitude

  2000 m

• Air humidity protection

  95% / 55°C

• Storage/transport temperature

  -40…70 °C

temperatur

• Temperature of calibration

  30 °C

• Ambient air temperature during heating test according to the product standard

  23.1 °C

• Max. admissible temperature on accessible parts (intended to be touched)

  68 °C

• Max. admissible temperature on accessible parts (manual operating means)

  55.3 °C

• Max. admissible temperature on access. parts (not touched for normal operation)

  72.9 °C

• Max. admissible temperature on terminals

  70.4 °C

• Temp.-rise limits for access. parts (toggle) according to product standard

  40 K

• Temp.-rise limits for access. parts (not touched) according to product standard

  40 K

• Temp.rise limits for access. parts (to be touched) according to product standard

  60 K

• Temperature-rise limits for terminals according to the product standard

  65 K

• Temperature-rise measured on accessible parts at In (manual operating means)

  15.3 K

• Temperature-rise measured on access. parts at In (not touched normal operation)

  32.9 K

• Temperature-rise measured on accessible parts at In (intended to be touched)

  28 K

• Temperature-rise measured on terminals at In

  30.4 K